01628 632050 sales@gips-uk.com

Widgetized Area

This panel is active and ready for you to add some widgets via the WP Admin

Select Page

Plates

  1. Offshore & Structural Plate
  2. High Strength Low Alloy Plate (HSLA)
  3. Boiler, Pressure Vessel & Chrome Moly Steels
  4. Stainless Steels & Nickel Alloy
  5. Sections, Bars & Shapes
  6. Pipes, Tubular & Hollow Sections

1. OFFSHORE & STRUCTURAL PLATE

Standards:
  • BS EN 10225 S355 G2, G7, G8, G9 & G10 / S460 G2
  • BS EN 10025 S355 K2G4 / K2G3 / J2 / K2
  • BS 7191 355EM, 355EMZ / 450EM / 450EMZ / 355D / 275D
  • BS 4360 43EE / 50D / 50DD / 55C
  • FE 510D1 / 510DD1
  • EH 36 / API 2H Grade 50
All Offshore & Structural Quality Steel Plates are Supplied as follows:
  • In Standard & Non Standard Sizes
  • Available in Other Thicknesses, Widths and Lengths
  • Fully Weldable
  • Low Temperature Impact Tested @ -20oC -40oC -50oC
  • Yield Range from 36Ksi to 65Ksi
  • Through Thickness “Z” Testing Available
  • All Material Fully Certified to EN 10204 3.1b or 3.1c as Required
  • Additional NDT Testing and Third Party Inspection is Available on Request
  • A Full Cutting and Profiling Service is Available
Supply Condition for Offshore & Structural Plate:
  • As Rolled
  • Normalized
  • Thermo Mechanically Controlled Rolled (T.M.C.R)
  • Accelerated Cooled
  • Quenched and Tempered

2. HIGH STRENGTH LOW ALLOY PLATE (HSLA)

Standards:
  • EN 10025-6 S460 QL / S620 QL / S690 QL
  • BS 4360 Grade 55F
High Strength Low Alloy Steels are Supplied as follows:
  • In Standard & Non Standard Sizes
  • Available in Other Thicknesses, Widths and Lengths
  • Fully Weldable, Notch Toughened
  • Low Temperature Impact Tested @ -40oC -45oC -60oC
  • High Brinell Hardness
  • Yield Range from 65Ksi to 100Ksi
  • All Material Fully Certified to EN 10204 3.1b or 3.1c as Required
  • Through Thickness “Z” Testing Available
  • All Material Fully Certified to EN 10204 3.1b or 3.1c as Required
  • Additional NDT Testing and Third Party Inspection is Available on Request
  • A Full Cutting and Profiling Service is Available
Supply Condition for H.S.L.A Steels:
  • Normalized
  • Roller Quenched and Tempered (RQT)

3. BOILER, PRESSURE VESSEL & CHROME MOLY STEELS

Standards:
  • BS 1501-161-430 A/B // 1501-224-490B LT50 // 1501-223-490B LT50 // 1501-225-490B LT50
  • BS EN 10028 P335 NL1 / 10028-3 1993 P460 NL1
  • ASME SA 516 Grade 60 / 65 / 70 (N)
  • ASTM A285 Grade C / DIN 17155 HII
Boiler & Pressure Vessel Steels are Supplied as follows:
  • In Standard & Non Standard Sizes
  • Thickness Tolerance to EN 10029 Class C
  • Fully Weldable
  • All Material Fully Certified to EN 10204 3.1b or 3.1c as Required
  • Multi Grade Certification
  • NACE Hardness to MR 0175
  • Additional Testing Services (NAMAS Approved Test Houses)
  • HIC to NACE Specifications
  • Simulated PWHT Testing Available
  • Through Thickness Tensile Testing
  • Impact Testing
  • A Full Cutting and Profiling Service is Available
Supply Condition for Boiler & Pressure Vessel Steels:
  • Normalized

4. STAINLESS STEELS & NICKEL ALLOY

Austenitic Grades:
  • ASTM A240 304/304L, 316/316L, 321/321H, 304H
  • ASME SA240 304/304L, 316/316L, 321/321H, 304H
  • BS EN 10028-7 / DIN 1.4301/1.4307/1.4401/1.4404/1.4541/1.4948
Nickel Alloys:
  • Inconel 600, 601, 617, 625, 718, X-750
  • Incoloy 800 / 800H, Alloy 330, Alloy 188, L-605

Size Range up to 50mm Thick in Standard and Large Area Plates. Other Thicknesses on Request.

Stainless Steels & Nickel Alloys are Supplied as follows:
  • In Standard & Non Standard Sizes
  • Available in Other Thicknesses, Widths and Lengths
  • Thickness Tolerance to BS EN 10029 Class B
  • NACE Hardness to MR 0175
  • Annealed and Pickled
  • All Material Fully Certified to EN 10204 3.1b or 3.1c as Required
  • Inter Granular Corrosion Test (IGC) to ASTM A262 Practice E
  • Hot Rolled Mill Finish No. 1
  • Polished to Meet Your Requirements – Dull or Bright Polishing
Duplex Grades
  • ASTM A240 UNS S31803 / ASME SA240 UNS S31803 / BS EN 10028-7 / DIN 1.4462
Super Duplex
  • ASTM A240 UNS S32750 / ASME SA240 UNS S32750 / BS 10028-7 / DIN 1.4410

5. SECTIONS, BARS & SHAPES

Standards:
  • BS 7191 355EM / 355D / 275D
  • BS 4360 50D / 50B / 50C / 43D (Modified)
  • EN 10025 S355 J2 / JR / JO / ML / G11 / G12, 10025 S275 J2
Supply Condition:
  • As Rolled
  • Normalized

6. PIPES, TUBULARS & HOLLOW SECTIONS

Structural Seamless Tubes
  • API 5L X52 Modified / 5L X56, X60, X65, X70
  • BS 7191 355EM / 355EMZ / 450EM / 450EMZ
  • EN 10210 S355 J2H (Modified), EN 10225 S355 G15
  • ASTM A333 Gr. 6
Supply Condition:
  • As Rolled
  • Normalized
All Structural Seamless Tubes are Supplied as follows:
  • Fully Weldable
  • Yield Range from 50Ksi – 100Ksi
  • Low Temperature Impact Tested @ -20oC -40oC -50oC
  • All Material Fully Certified to EN 10204 3.1b or 3.1c as Required
  • Additional Testing Services (NAMAS Approved Test Houses)
  • Available in Random and Double Random Lengths Between 6m – 14m
  • Longer Lengths and a full Cutting Service Available on Request
Supply Condition for Structural Seamless Tubes:
  • Normalized
  • Hot Finished Seamless Pipe
  • Quenched and Tempered
  • As Rolled
Welded Tubes
  • API 5LB / 5L X52 – X70 / 2H Grade 50
  • BS 7191 355D & DZ / 355EM / 355EMZ / 450EM / 450EMZ
  • ASTM A36 / A572 Gr. 50 / A4130